Pre-tensioner - front seat belt

RESTRAINT SYSTEMS

75-18

REPAIRS

Pre-tensioner - front seat belt  

$% 76.73.30  

WARNING: It is imperative that before any work 
is undertaken on the SRS system the appropriate 
information is read thoroughly.

WARNING: Always disconnect both battery leads 
before beginning work on the SRS system. 
Disconnect the negative battery lead first. Never 
reverse connect the battery.

Remove

1. Remove the key from the starter switch. 

Disconnect both battery leads, negative lead 
first. Wait ten minutes before starting work.

2. Remove front seat.  

 + 

 SEATS, REPAIRS, Seat - front.

3. Release cable tie securing pre-tensioner  

harness to seat. 

4. Remove Torx screw securing pre-tensioner  to 

seat. 

5. Remove pre-tensioner. 

WARNING: Store the airbag module or seat 
belt pre-tensioner in a designated storage 
area. If there is no designated storage area 
available, store in the locked luggage 
compartment/loadspace of the vehicle and 
inform the workshop supervisor.

Refit

1. Fit pre-tensioner to seat and tighten Torx bolt to 

32 Nm (24 lbf.ft).

2. Secure harness to seat with new cable tie. 
3. Fit front seat.

 + 

 SEATS, REPAIRS, Seat - front.

4. Connect battery leads, earth lead last.