Engine oil - V8 engine (MAINTENANCE)

MAINTENANCE

10-14

PROCEDURES

Intercooler - diesel engine

Remove

1. Remove intercooler.

 + 

 ENGINE MANAGEMENT SYSTEM - 

Td5, REPAIRS, Intercooler.

Flush

1. Flush intercooler element using Flushing 

Solvent Part No. STC 9713, following the 
manufacturer's instructions.

2. Thoroughly dry intercooler ensuring that no 

trace of solvent remains in the element.

3. Refit intercooler on completion. 

 + 

 ENGINE MANAGEMENT SYSTEM - 

Td5, REPAIRS, Intercooler.

Engine oil - V8 engine

WARNING: Avoid excessive skin contact with 
used engine oil. Used engine oil contains 
potentially harmful contaminants which may 
cause skin cancer or other serious skin 
disorders.

Replace

1. Position suitable container beneath sump.
2. Clean area around oil drain plug.

3. Remove oil drain plug, discard sealing washer.
4. Allow oil to drain.
5. Fit new sealing washer to oil drain plug.
6. Fit engine drain plug and tighten to 33 Nm (24 

lbf.ft).

7. Fill engine with recommended grade of oil to 

correct mark on dipstick.
 

 + 

 CAPACITIES, FLUIDS, 

LUBRICANTS AND SEALANTS, 
Lubrication.