Oil seal - rear output shaft

TRANSFER BOX

REPAIRS

41-11

 Oil seal - rear output shaft  

$% 41.20.54

Remove

1. Remove rear propeller shaft.

 + 

 DRIVESHAFTS, REPAIRS, Propeller 

shaft - rear.

2. Release output shaft flange nut stake.

3. Using LRT-51-003 to restrain drive flange, 

remove nut and remove drive flange. Discard 
nut and 'O' ring.

4. Remove seal from transfer gearbox.

Refit

1. Clean oil seal recess in transfer gearbox.

2. Using LRT-41-020 fit seal to transfer gearbox 

box.

3. Clean drive flange and mating face.
4. Fit flange, use new 'O' ring and tighten new nut 

to 100 Nm (74 lbf.ft).

5. Stake output shaft flange nut to shaft.

6. Fit rear propeller shaft.

 + 

 DRIVESHAFTS, REPAIRS, Propeller 

shaft - rear.

7. Check and if necessary, top up transfer 

gearbox oil.
 

 + 

 TRANSFER BOX, ADJUSTMENTS, 

Drain and refill.

M41 7850

LRT-51-003

M41 7851

LRT-41-020