Drive shaft - front - RH (page 2 of 4)

DRIVESHAFTS

REPAIRS

47-5

4. Release drive shaft hub nut stake.
5. With an assistant applying brakes, remove and 

discard drive shaft hub nut.

6. Remove brake disc.

 + 

 BRAKES, REPAIRS, Brake disc - 

front.

7. Release ABS sensor lead from clip.
8. Release sensor lead from damper, remove 

Allen screw and release ABS sensor from hub.

9. Remove and discard nut securing track rod ball 

joint to steering arm.

10. Fit an M14 nut to ball pin, flush with end of pin.
11. Using LRT-57-036 separate ball pin from 

steering arm. Remove M14 nut and release ball 
pin from steering arm.

CAUTION: Ensure ball joint seal is not 
damaged. A damaged seal will lead to 
premature failure of the joint.

12. Remove nut securing height sensor link to 

lower arm and release link.

CAUTION: Use an open ended spanner on 
flats provided to prevent ball joint rotating.

13. Loosen bolt securing lower arm to subframe 

one quarter of a turn.

14. Remove nut securing lower arm ball joint to 

hub.

M47 0412

M54 0179

LRT-57-036