Pump - pre-charge

BRAKES

REPAIRS

70-9

Pump - pre-charge 

$% 70.25.17

Remove

1. Remove front wheel arch liner.

 + 

 EXTERIOR FITTINGS, REPAIRS, 

Liner - front wheel arch.

2. Remove nut securing alarm sounder to 

mounting bracket and move aside.

3. Position container to collect fluid spillage.

CAUTION: Brake fluid will damage paint 
finished surfaces. If spilled, immediately 
remove fluid and clean area with water.

4. Disconnect brake pipe from master cylinder.

CAUTION: Always fit plugs to open 
connections to prevent contamination.

5. Disconnect feed hose.
6. Remove bolt securing pre-charge pump 

bracket to body.

7. Release pump from rubber mounting.
8. Disconnect multiplug.
9. Remove pump.

NOTE: Do not carry out further dismantling if 
component is removed for access only.

M70 1158

M70 1159