Bearing(s) - hub

REAR SUSPENSION

REPAIRS

64-7

Refit

1. Clean ball joint and location in hub.

2. Fit ball joint with circlip groove facing towards 

rear using LRT-64-026/3 with  LRT-64-026/2.

3. Fit new circlip.
4. Fit bolt securing brake disc backplate.
5. Clean lower arm and hub mating faces.
6. Align hub to lower arm, fit new nut and bolt and 

tighten to 250 Nm (184 lbf.ft).

7. Fit tie rod.

 + 

 REAR SUSPENSION, REPAIRS, Tie 

rod.

8. Check wheel alignment.

Bearing(s) - hub 

$% 64.15.14

Remove

1. Remove hub assembly.

 + 

 REAR SUSPENSION, REPAIRS, 

Hub.

2. Remove 4 bolts securing backplate to hub.

3. Fit adapter, LRT-60-033/5 to drive flange.

M64 0205