Light check module (LCM)

LIGHTING

86-2-12 REPAIRS

Switch - combined direction indicator/
headlight

$% 86.65.55

Remove

1. Remove rotary coupler.

 + 

 RESTRAINT SYSTEMS, REPAIRS, 

Rotary coupler.

2. Depress 2 clips and remove switch from rotary 

coupler assembly.

Refit

1. Fit switch to rotary coupler, ensure 

engagement of clips.

2. Fit rotary coupler.

 + 

 RESTRAINT SYSTEMS, REPAIRS, 

Rotary coupler.

Light check module (LCM) 

$% 86.77.02 

If the LCM is to be replaced then Testbook/T4 must 
be connected and correct procedures adhered to, 
prior to battery disconnection.

Remove

1. Remove RH lower 'A' post finisher.

 + 

 INTERIOR FITTINGS, REPAIRS, 

Trim finisher - 'A' post - lower.

2. Remove screw securing LCM to 'A' post.

3. Release LCM from mounting and disconnect 

multiplugs.

4. Remove LCM.

Refit

1. Position LCM and connect multiplugs.
2. Fit LCM and secure with screw.
3. Fit RH lower 'A' post finisher.

 + 

 INTERIOR FITTINGS, REPAIRS, 

Trim finisher - 'A' post - lower.

4. Configure new LCM using TestBook/T4.

M86 5723