Drive shaft - rear

DRIVESHAFTS

REPAIRS

47-15

'O' Ring - driveshaft housing  

$% 47.10.43

Remove

1. Remove RH drive shaft seal.

 + 

 DRIVESHAFTS, REPAIRS, Seal - 

drive shaft - front - RH.

2. Remove 4 bolts, remove support housing and 

discard 'O' ring.

NOTE: Do not carry out further dismantling if 
component is removed for access only.

Refit

1. Clean 'O' ring groove, housing and mating face.
2. Lubricate new 'O' ring and fit to housing.
3. Carefully fit housing and tighten bolts to 22 Nm 

(16 lbf.ft).

4. Fit RH drive shaft seal.

 + 

 DRIVESHAFTS, REPAIRS, Seal - 

drive shaft - front - RH.

Drive shaft - rear 

$% 47.11.01

Remove

1. Raise rear of vehicle.

WARNING: Do not work on or under a 
vehicle supported only by a jack. Always 
support the vehicle on safety stands.

2. Remove road wheel.

3. Remove 6 bolts securing drive shaft to 

differential drive flange and collect 3 bolt plates. 
Discard bolts.

4. Release drive shaft hub nut stake.
5. With an assistant applying brakes, remove and 

discard drive shaft hub nut.

6. Remove brake disc.

 + 

 BRAKES, REPAIRS, Brake disc - 

rear.