CENTRE CONSOLE
- Make
- Land Rover
- Model
- Range Rover P38
- Section
- REPAIR › CENTRE CONSOLE
CHASSIS AND BODY
5
REPAIR
CENTRE CONSOLE
Service repair no - 76.25.01
Remove
1. Remove electric window switch pack.
See
ELECTRICAL, Repair.
2. Disconnect rear footwell lamp multiplug.
3. Remove base in console bin.
4. Remove nuts securing rear of console to floor
studs.
5. Move both front seats fully rearward.
6. Remove 2 screws securing each side panel to
centre console. Release sprag clips from fascia
switch pack by firmly pulling rearwards. Remove
side panels.
7. Remove screw at rear of gear lever applique.
Raise rear end of applique to disengage 2 spring
clips at forward end.
8. Disconnect cigar lighter multiplug, release cigar
lighter bulb. Remove gear lever applique.
9. Manual gearbox models:
Remove gear knob. Remove 2 bolts securing
front of console to floor.
10. Automatic gearbox models:
Remove 2 screws securing selector lever.
11. Remove selector lever.
Parts & tools for this job Staging For Land Rover Range Rover
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Land Rover touch up paint
- PARTPanel clip assortmentSearch: Land Rover panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.