GEARBOX
- Make
- Land Rover
- Model
- Range Rover P38
- Section
- REPAIR › GEARBOX
R380 GEARBOX
1
REPAIR
GEARBOX
Service repair no - 37.20.02 - Gearbox Renew
Service repair no - 37.20.02/99 - Gearbox Remove
for Access
Remove
1. Raise vehicle on four post lift.
2. Disconnect battery negative lead.
3. Petrol Vehicles: Release 2 clips securing
cooling fan cowling to radiator. Remove cowl.
4. Remove centre console.
See CHASSIS AND
BODY, Repair.
5. Remove 6 nuts securing gaiter ring. Remove
ring and gaiter
6. Remove 2 bolts securing gear lever. Remove
lever.
7. Remove handbrake cable clevis pin.
8. Release handbrake cable from grommet in
tunnel. Refit cable grommet to tunnel.
9. Raise lift. Drain gearbox and transfer box oil.
See SECTION 10, Maintenance.
10. Remove exhaust front pipe.
See MANIFOLD
AND EXHAUST SYSTEM, Repair.
11. Diesel Vehicles: Remove chassis
crossmember.
See CHASSIS AND BODY,
Repair.
12. Remove 4 bolts securing rear propeller shaft
guard. Remove guard.
Parts & tools for this job Staging For Land Rover Range Rover
- PARTClutch kitSearch: Land Rover Range Rover clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Land Rover Range Rover manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.