Pump - washer
- Make
- Land Rover
- Model
- Range Rover L322 Range Rover Service Procedures
- Section
- REPAIRS › Pump - washer
WIPERS AND WASHERS
84-2
REPAIRS
Refit
1. Connect low level sensor to multiplug and fit to
reservoir.
2. Position wheel arch liner and secure with
screw.
3. Lower vehicle ramp.
4. Position steering wheel straight ahead.
Pump - washer
$% 84.10.21
Remove
1. Remove LH front wheel arch liner.
2. Position container to catch windscreen washer
fluid.
3. Disconnect multiplug and hose from
windscreen washer pump.
4. Remove washer pump from reservoir and
remove and discard pump seal.
Refit
1. Clean washer pump and reservoir recess.
2. Fit new seal to pump and fit to reservoir.
3. Connect hose and multiplug to pump.
4. Refill reservoir.
5. Fit wheel arch liner.
Parts & tools for this job Staging For Land Rover Range Rover
- PARTWiper bladesSearch: Land Rover Range Rover wiper blades
- PARTWasher pumpSearch: Land Rover Range Rover washer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.