Cover - one piece - front seat cushion
- Make
- Land Rover
- Model
- Range Rover L322 Range Rover Service Procedures
- Section
- REPAIRS › Cover - one piece - front seat cushion
SEATS
REPAIRS
76-5-3
Rear seat
$% 78.10.48.99
Remove
1. Fit protection to wheel arch.
2. Remove 2 bolts securing rear seat.
3. Release rear seat and roll it forwards.
4. Disconnect multiplug from seat.
5. Remove 2 nuts securing seat and with
assistance, carefully remove seat from vehicle.
Refit
1. Fit rear seat in fully folded position and tighten
nuts to 25 Nm (18 lbf.ft).
2. Connect multiplug to seat.
3. Position seat in upright position.
4. Fit bolts securing rear seat and tighten to 25
Nm (18 lbf.ft).
Cover - one piece - front seat cushion
$% 78.30.01
Remove
1. Remove seat assembly.
2. Remove Allen bolt securing arm rest.
3. Remove armrest from boss.
4. Remove screw securing finisher on inner seat
base, remove finisher.
5. Remove switch pack assembly.
6. Release 3 backboard tension straps from under
seat.
M78 0606
M78 0613
Parts & tools for this job Staging For Land Rover Range Rover
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Land Rover Range Rover
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.