Glass - tailgate upper

SCREENS

REPAIRS

76-4-1

SCREENS

REPAIRS

Glass - tailgate upper

$% 76.31.22 

The following equipment is required:

l

Cutting wire and handles

l

Glazing knife

l

Glass replacement kit

l

Sealant applicator gun

l

Suction cups

l

A felt covered table or stand to support glass

Remove

1. Remove rear wiper arm.

 + 

 WIPERS AND WASHERS, REPAIRS, 

Arm - wiper - tailgate.

2. Remove tailgate trim casing.

 + 

 DOORS, REPAIRS, Trim casing - 

tailgate upper.

3. Remove tailgate inner side finishers.
4. Remove tailgate glass outer finisher.

5. Disconnect 3 multiplugs from tailgate glass.
6. Protect exterior body work adjacent to rear 

screen.

7. From inside vehicle, carefully cut through 

sealant securing lower edge of windscreen with 
a glazing knife. It is not practical to use a Kent 
knife as the windscreen is very close to body.

8. If necessary, use cutting wire to cut through any 

remaining sealant securing top and sides of 
windscreen.

9. Attach suction cups and with assistance, 

remove windscreen and place on stand.

CAUTION: Lay glass on felt covered 
supports and be careful not to damage the 
obscuration band. Do not stand on edge as 
this can cause chips which subsequently 
develop into cracks.

10. Remove 2 windscreen support blocks from 

body.