Closing panel - fascia end

INTERIOR FITTINGS

76-3-14 REPAIRS

3. Position shroud to carrier, fit and secure with 

clips and screws.

4. Fit drivers side lower trim finisher.

 + 

 INTERIOR FITTINGS, REPAIRS, 

Finisher - lower - drivers side.

5. Fit drivers side upper trim finisher.

 + 

 INTERIOR FITTINGS, REPAIRS, 

Finisher - upper - drivers side.

6. Fit centre air vent.

 + 

 HEATING AND VENTILATION, 

REPAIRS, Ventilator(s) - centre.

7. Fit glove box.

 + 

 INTERIOR FITTINGS, REPAIRS, 

Glove box.

8. Fit rotary coupler.

 + 

 RESTRAINT SYSTEMS, REPAIRS, 

Rotary coupler.

Closing panel - fascia end 

$% 76.46.11

Remove

1. Release sufficient door aperture seal to access 

closing panel.

2. Release 3 clips securing end closing panel to 

fascia and carefully remove panel.

NOTE: Do not carry out further dismantling if 
component is removed for access only.

3. Remove 3 retaining clips from closing panel.

Refit

1. Fit retaining clips to closing panel.
2. Position closing panel to fascia, align and 

secure clips.

3. Fit seal to door aperture.