Strainer - oil pick up

ENGINE - V8

REPAIRS 12-2-55

Refit

1. Clean dipstick tube and mating faces in engine 

oil sump.

2. Fit new 'O' ring to oil sump and position dipstick 

tube and washer to oil sump.

3. Fit clamp securing dipstick tube to oil sump and 

tighten nut.

4. Fit and tighten 2 nuts securing dipstick tube 

bracket to camshaft cover.

5. Fit dipstick.
6. Check engine oil level, top-up if necessary.
7. Connect battery earth lead.

Strainer - oil pick up  

$% 12.60.20 

Before disconnecting the battery, ensure all text and 
cautions in the battery disconnection section are 
observed. 
 

 + 

 GENERAL INFORMATION, Electrical 

Precautions.

Remove

1. Position vehicle on lift.
2. Disconnect battery earth lead.
3. Remove lower oil sump.

 + 

 Engine - V8, REPAIRS, Gasket - 

lower oil sump.

4. Remove 2 bolts securing oil pick-up strainer to 

oil pump, remove strainer and discard 'O' ring.

Refit

1. Clean oil pick up strainer and mating faces.
2. Fit new 'O' ring to oil pump groove location, 

position oil pick-up strainer to oil pump.

3. Fit and tighten 2 bolts securing oil pick-up 

strainer to oil pump.

4. Fit lower oil sump.

 + 

 Engine - V8, REPAIRS, Gasket - 

lower oil sump.

5. Connect battery earth lead.