Gaiter - inner joint (page 2 of 2)

DRIVESHAFTS

REPAIRS

47-19

9. Supporting drive shaft joint, use LRT-12-076 to 

remove joint from drive shaft.

10. Remove and discard joint retaining ring from 

drive shaft.

11. Remove gaiter from drive shaft.

Refit

1. Clean drive shaft and joint.
2. Fit gaiter to drive shaft.
3. Fit new joint retaining ring to drive shaft.
4. Ensure reference marks are aligned and fit joint 

to drive shaft.

5. Fit new circlip to drive shaft.
6. Apply grease from the sachet to the joint.
7. Position gaiter to joint and secure to joint and 

shaft with new clips.

8. Fit new dust cover to drive shaft.
9. Fit rear drive shaft.

 + 

 DRIVESHAFTS, REPAIRS, Gaiter - 

bell & joint - outer - rear.