Sensor - ultrasonic

ALARM SYSTEM AND HORN

REPAIRS

86-5-5

Receiver - alarm 

$% 86.77.31

Remove

1. Remove upper tailgate finisher.

 + 

 DOORS, REPAIRS, Trim finisher - 

tailgate - upper.

2. Remove Torx bolt securing receiver to tailgate.
3. Disconnect 2 multiplugs and aerial lead from 

receiver, remove receiver.

Refit

1. Connect multiplugs and aerial lead to receiver.
2. Position receiver to tailgate mounting, fit and 

tighten bolt to 6 Nm (4.4 lbf.ft).

3. Fit upper tailgate finisher.

 + 

 DOORS, REPAIRS, Trim finisher - 

tailgate - upper.

Sensor - ultrasonic 

$% 86.77.32

Remove

1. Carefully release rear console from headlining.
2. Disconnect multiplug from interior lamp.
3. Disconnect multiplug from ultrasonic module 

and remove console assembly.

4. Carefully release and remove ultrasonic sensor 

and module.

Refit

1. Fit ultrasonic module and sensor to console.
2. Position console assembly and connect 

multiplugs.

3. Fit rear console to headlining.

M86 5713

M86 5714