Workshop Manuals Factory service & repair Land Rover
01 Freelander 2001 TO 2004MY Onwards Workshop Manual - System Description and Operation - 5th Edition - NAS02 03 04 05 06 07 08 ENGINE - K SERIES KV609 10 11 12 EMISSION CONTROL - K SERIES KV613 14 15 16 17 18 19 ENGINE MANAGEMENT SYSTEM - SIEMENS20 FUEL DELIVERY SYSTEM - K SERIES KV621 22 23 COOLING SYSTEM - K SERIES KV624 25 MANIFOLD AND EXHAUST SYSTEM - K SERIES KV626 27 INTERMEDIATE REDUCTION DRIVE28 AUTOMATIC GEARBOX - JATCO29 DRIVESHAFTS30 31 REAR AXLE AND FINAL DRIVE32 STEERING33 FRONT SUSPENSION34 35 REAR SUSPENSION36 37 BRAKES38 RESTRAINT SYSTEMS39 HEATING AND VENTILATION40 41 AIR CONDITIONING42 43 44 WIPERS AND WASHERS45 CONTROL UNITS46 47 COMMUNICATION DATA BUSES48 49 SECURITY50 51 52 WINDOWS53 54 55 DRIVING AIDS56 NAVIGATION SYSTEM57 58 INSTRUMENTS
Land Rover Freelander System Description and Operation45 · CONTROL UNITS
45 · Diagnostics

Anti-lock Braking System (ABS) Modulator

Make
Land Rover
Model
Freelander System Description and Operation
Section
Description › Anti-lock Braking System (ABS) Modulator
CONTROL UNITSAnti-lock Braking System (ABS) Modulator
background image

CONTROL UNITS

86-3-6

DESCRIPTION AND OPERATION

Radio Frequency (RF) Receiver
The RF receiver is part of the security system and relays data from the remote transmitter (plip) to the CCU. The RF 
receiver is located on top of the instrument pack, between the housing and the face plate. 
 

 + 

 SECURITY, DESCRIPTION AND OPERATION, Description.

Immobilisation ECU
The immobilisation ECU controls operation of the starter motor to provide the engine immobilisation function of the 
security system. The immobilisation ECU is secured to the rear of the fascia near the vehicle centre-line. 
 

 + 

 SECURITY, DESCRIPTION AND OPERATION, Description.

Supplementary Restraint System (SRS) Diagnostic Control Unit (DCU)
The SRS DCU controls the operation of the vehicle's airbags and seat belt pretensioners. The SRS DCU is attached 
to the transmission tunnel below the heater assembly. 
 

 + 

 RESTRAINT SYSTEMS, DESCRIPTION AND OPERATION, Description.

Electronic Automatic Transmission (EAT) ECU
The EAT ECU controls gear changing and torque converter lockup. The EAT ECU is installed in the Environmental 
(E) box in the engine compartment. 
 

 + 

 AUTOMATIC GEARBOX - JATCO, DESCRIPTION AND OPERATION, Description.

Engine Control Module (ECM)
The ECM controls all aspects of engine operation and interfaces with the security system during engine starting. The 
ECM is installed in the E-box in the engine compartment. 
 

 + 

 ENGINE MANAGEMENT SYSTEM - SIEMENS, DESCRIPTION AND OPERATION, Description.

Cooling Fan ECU 
The cooling fan ECU controls the speed of the two cooling fans. The cooling fan ECU is installed in the rear upper left 
corner of the cooling fan housing. 
 

 + 

 COOLING SYSTEM - K SERIES KV6, DESCRIPTION AND OPERATION, Description.

Anti-lock Braking System (ABS) Modulator
The brake system incorporates an ABS ECU that controls the operation of the hydraulic modulator to provide the ABS, 
electronic brake force distribution, traction control and hill descent control functions. The ABS ECU is attached to the 
hydraulic modulator, which is installed in the front right corner of the engine compartment. 
 

 + 

 BRAKES, DESCRIPTION AND OPERATION, Description.

Parts & tools for this job Staging For Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.