WASHER PUMP
- Make
- Land Rover
- Model
- Range Rover P38
- Section
- REPAIR › WASHER PUMP
WIPERS AND WASHERS
7
REPAIR
WASHER JET - REAR
Service repair no - 84.30.09
Remove
1. Prise washer jet from tailgate.
CAUTION: Do not use a metal lever, or
painted surface may be damaged.
2. Remove washer jet from tube.
Refit
3. Reverse removal procedure.
WASHER PUMP
Service repair no - 84.10.21
Remove
1. Raise the vehicle.
WARNING: Support on safety stands.
2. Release washer reservoir for access.
See this
section.
3. Drain washer fluid into a suitable container.
4. Disconnect pump multiplug and hose.
5. Remove pump from reservoir. Collect seal and
discard.
Refit
6. Fit seal and pump to reservoir.
7. Connect multiplug and hose.
8. Refit washer reservoir.
See this section.
9. Remove safety stands. Lower vehicle.
Parts & tools for this job Staging For Land Rover Range Rover
- PARTWiper bladesSearch: Land Rover Range Rover wiper blades
- PARTWasher pumpSearch: Land Rover Range Rover washer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.