Rear beam

FRONT SUSPENSION

REPAIRS

60-13

Rear beam 

$% 60.35.23

Remove

1. Remove underbelly panel.

 + 

 EXTERIOR FITTINGS, REPAIRS, 

Panel - underbelly.

2. Remove bolt securing engine lower steady to 

beam.

3. Remove 4 bolts securing anti-roll bar saddle 

clamps to beam.

4. Support anti-roll bar.

5. Loosen nuts securing lower arm rear 

mountings.

6. Remove 2 bolts securing each lower arm rear 

bush housing.

7. Remove lower arm pivot bush bolts.
8. Release lower arms from beam.

9. Support beam and remove 2 remaining bolts 

securing beam.

10. Lower and remove beam.