SRS HARNESS - DISTRIBUTED SYSTEM
- Make
- Land Rover
- Model
- Range Rover P38
- Section
- REPAIR › SRS HARNESS - DISTRIBUTED SYSTEM
SUPPLEMENTARY RESTRAINT SYSTEM
3
REPAIR
SRS HARNESS - SINGLE POINT SENSED SYSTEM
Service repair no - 76.73.73
The SRS harness is incorporated into the fascia
harness.
See ELECTRICAL, Repair.
SRS HARNESS - DISTRIBUTED SYSTEM
Service repair no - 76.73.73
Remove
1. Raise the vehicle.
WARNING: Support on safety stands.
2. Remove battery.
See ELECTRICAL, Repair.
3. Remove centre console.
See CHASSIS AND
BODY, Repair.
4. Remove passenger air bag module.
See this
section.
5. Remove radio.
See ELECTRICAL, Repair.
6. Remove instrument pack binnacle.
See
INSTRUMENTS, Repair.
7. Remove 5 screws securing switch pack to
fascia.
8. Disconnect switches, clock and temperature
sensor. Remove switch pack.
9. Remove 4 screws securing heater control panel.
10. Disconnect multiplugs. Remove control panel.
11. Release door aperture seal adjacent to A post
lower trim panels.
12. Driver’s side - LHD automatic vehicles only:
Remove 3 bolts securing foot rest. Remove foot
rest.
Parts & tools for this job Staging For Land Rover Range Rover
- TOOLOBD2 scanner with SRSSearch: OBD2 scanner ABS SRS
- TOOLTrim removal tool kitSearch: trim removal tool kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.