TRACK ROD
- Make
- Land Rover
- Model
- Range Rover P38
- Section
- REPAIR › TRACK ROD
STEERING
17
REPAIR
STEERING WHEEL PAD
Service repair no - 57.60.03
NOTE: For vehicles fitted with
supplementary restraint system (SRS).
See SUPPLEMENTARY RESTRAINT
SYSTEM, Repair.
Remove
1. Position steering wheel for access to all fixings.
2. Unscrew 4 bolts securing pad to steering wheel.
NOTE: Bolts remain captive in steering
wheel.
3. Remove steering wheel pad.
Refit
4. Position pad to steering wheel. Secure with
bolts. Tighten to
8 Nm (6 lbf.ft)
TRACK ROD
Service repair no - 57.55.09
Remove
1. Raise the vehicle.
WARNING: Support on safety stands.
2. Remove front wheels.
3. Remove 2 nuts securing track rod ball joints to
steering knuckles. Release taper joints. Remove
track rod.
Parts & tools for this job Staging For Land Rover Range Rover
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Land Rover power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.