ENGINE AND GEARBOX (page 10 of 12)

BMW DIESEL

15

REPAIR

63. Remove 4 nuts securing each engine mount to

chassis. Discard nuts.

64. Fit lifting bracket to engine lifting eyes. Attach

suitable hoist.

65. Raise engine slightly. Ensure that lifting bracket

does not foul bulkhead. Remove both engine
mountings.

NOTE: It may be necessary to lower
gearbox support slightly during above
operation.

66. Raise power unit and draw forward.
67. Lower support from transmission.

NOTE: Power unit must be tilted at an
angle of approximately 45 degrees before
it can be withdrawn from engine

compartment.

68. Remove engine/transmission assembly.