Stabilizer Link (64.35.24)

Stabilizer Bar Link (64.35.24)  

Removal  

Installation  

1 . 

   WARNING: Do not work on or under a vehicle supported only by a jack. Always support the 

vehicle on safety stands.

  Raise and support the vehicle. 

2 . 

  Remove the wheel and tire. 

3 . 

   CAUTION: Use a wrench on the hexagon provided to prevent the ball joint rotating.

Remove the stabilizer bar link. 

1 . 

  Install the stabilizer bar link. 

Tighten the nuts to 115 Nm (85 lb.ft).

2 . 

  Install the wheel and tire. 

Tighten the wheel nuts to 140 Nm (103 lb.ft).