Switch - combined direction indicator/ headlight/horn
- Make
- Land Rover
- Model
- Freelander Service Procedures
- Section
- REPAIRS › Switch - combined direction indicator/ headlight/horn
LIGHTING
86-2-10 REPAIRS
Switch - hazard warning
$% 86.65.50
Remove
1. Remove radio.
2. Remove selector knobs from heater controls.
3. Remove 2 screws securing heater control
finisher to heater controls and remove finisher.
4. Release hazard warning switch from heater
controls.
5. Disconnect multiplug and remove hazard
warning switch.
Refit
1. Position hazard warning switch and connect
multiplug.
2. Fit hazard warning switch to heater controls.
3. Fit heater control finisher to heater controls and
secure with screws.
4. Fit heater control knobs.
5. Fit radio.
Switch - combined direction indicator/
headlight/horn
$% 86.65.55
Remove
1. Remove steering column nacelle.
2. Disconnect 2 multiplugs from indicator and light
switch.
3. Rotate steering wheel to access switch screws.
4. Remove 2 screws securing switch.
5. Depress retaining tag and remove switch.
Refit
1. Fit indicator and light switch and secure with
screws.
2. Connect multiplugs to switch.
3. Fit steering column nacelle.
Parts & tools for this job Staging For Land Rover Freelander
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.