ENGINE OIL DELIVERY PIPE TO TURBOCHARGER - R + R

Operation 1084B40 · ENGINE OIL LUBRICATION CIRCUIT

1.9 JTD 8V, 1.9 JTD 16V

Removing

- Position the vehicle on a lift.

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1084A16 OIL DIPSTICK PIPE - R.R

Op. 1088D24 WATER PUMP RIGID COOLANT INLET PIPE - R.R.

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R

Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R

Op. 1080B62 CATALYTIC CONVERTER - R + R

1. Undo the connector (1a) and disconnect the turbocharger engine oil supply pipe (1b), turbocharger side.

1. Undo the connector (1a) and disconnect the turbocharger engine oil supply pipe (1b), engine crankcase side and remove it.

Refitting

1. Place the turbocharger engine oil supply pipe (1a) in position, connect it to the engine crankcase and tighten the connector (1b) to the recommended torque.

1. Connect the turbocharger engine oil supply pipe (1a), turbocharger side and tighten the connector (1b) to the recommended torque.

Op. 1080B62 CATALYTIC CONVERTER - R + R

Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R

Op. 1088D24 WATER PUMP RIGID COOLANT INLET PIPE - R.R.

Op. 1084A16 OIL DIPSTICK PIPE - R.R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 1016A10 SOUND-PROOFING COVER - R.R

- Remove the vehicle from the lift.

2.4 JTD 20V

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R

Op. 1048A51 TURBOCHARGER RIGID AIR INLET HOSE - R.R.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

op. 1072C44

1. Undo the engine oil supply pipe connector, engine crankcase side.

1. Undo the engine oil supply pipe connector, turbocharger side and remove it.

Refitting

- Fit the engine oil supply pipe in place and tighten the connectors to the recommended torque.

op. 1072C44

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1048A51 TURBOCHARGER RIGID AIR INLET HOSE - R.R.

Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R

Op. 1016A10 SOUND-PROOFING COVER - R.R