EXHAUST MANIFOLD HEAT SHIELD - R+R

Operation 1072C44 · EXHAUST MANIFOLDS

1.9 JTD 16V

Removing

- Position the vehicle on a lift.

Op. 1084A16 OIL DIPSTICK PIPE - R.R

Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.

Op. 1088D10 LOWER RADIATOR COOLANT OUTLET HOSE - R.R.

Op. 1088D14 UPPER RADIATOR COOLANT OUTLET HOSE - R.R.

1. Undo the upper bolts fixing the exhaust manifold heat shield.

1. Working underneath the vehicle, undo the nuts (1a) and remove the exhaust manifold heat shield (1b).

Refitting

- Place the exhaust manifold heat shield back in its housing and secure it using the nuts and bolts.

Op. 1088D14 UPPER RADIATOR COOLANT OUTLET HOSE - R.R.

Op. 1088D10 LOWER RADIATOR COOLANT OUTLET HOSE - R.R.

Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.

Op. 1084A16 OIL DIPSTICK PIPE - R.R

Op. 0010T20 ENGINE COOLANT - CHANGE

- Remove the vehicle from the lift.

2.4 JTD 20V

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R

Op. 1048A51 TURBOCHARGER RIGID AIR INLET HOSE - R.R.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

1. Undo the fastenings (1a) and remove the exhaust manifold heat shield (1b).

Refitting

- Place the exhaust manifold heat shield back in its housing and tighten it it using the fastenings.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1048A51 TURBOCHARGER RIGID AIR INLET HOSE - R.R.

Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R

Op. 1016A10 SOUND-PROOFING COVER - R.R