Workshop Manuals Factory service & repair Alfa Romeo
Alfa Romeo GT Factory Service Manual (2003-2010)08 · Engine
08 · Engine

Fixed timing system tensioner (one) r + r

Make
Alfa Romeo
Model
GT Factory Service Manual
Year
2003–2010
Section
Timing system › Fixed timing system tensioner (one) r + r
EngineFixed timing system tensioner (one) r + r

FIXED TIMING SYSTEM TENSIONER (ONE) R + R

Operation 1032C32 · TIMING SYSTEM TENSIONERS

2.0 JTS

Removing

Proceed with the removal

Op. 4450B04 RIGHT FRONT WHEEL R R.

Proceed with the removal

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with the removal

Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.

Proceed with the removal

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.

Proceed with the removal

Op. 1032C30 FIXED TIMING SYSTEM TENSIONER - R + R WITH TIMING BELT REMOVED.

Refitting

Proceed with the refitting

Op. 1032C30 FIXED TIMING SYSTEM TENSIONER - R + R WITH TIMING BELT REMOVED.

Proceed with the refitting

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.

Proceed with the refitting

Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.

Proceed with the refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with the refitting

Op. 4450B04 RIGHT FRONT WHEEL R R.

3.2 V6

Removing

Position the vehicle on a lift.

Proceed with the removal

Op. 4450B04 RIGHT FRONT WHEEL R R.

Proceed with the removal

Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.

Proceed with the removal

Op. 1092G10 SINGLE ENGINE BELT R R.

Proceed with the removal

Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..

Proceed with the removal

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.

Proceed with the removal

Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+R.

Proceed with the removal

Op. 5510C16 LEFT HAND CYLINDER HEAD IGNITION COIL - R+R.

Proceed with the removal

Op. 1016A30 LEFT CAM COVER - R + R AND REPLACE GASKET.

Proceed with the removal

Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R.

Proceed with the removal

Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R.

Proceed with the removal

Op. 1016A34 RIGHT-HAND CAM COVER - R + R AND REPLACE GASKET.

Proceed with the removal

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.

PROCEED AS FOLLOWS FOR THE UPPER FIXED TIMING TENSIONER.

1. Undo the bolt (1a) and remove the upper fixed timing tensioner (1b).

PROCEED AS FOLLOWS FOR THE LOWER FIXED TIMING TENSIONER.

2. Undo the bolt (2a) and remove the lower fixed timing tensioner (2b).

FIXED TIMING SYSTEM TENSIONER (ONE) R + R

Refitting

Position the fixed timing tensioner in its housing and secure it tightening the bolt to the recommended torque.

FasteningComponentØ

Value

(daNm)

BoltFIXED TENSIONERM10(Cylinder head side) 4.5 - 5.5

Proceed with the refitting

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.

Proceed with the refitting

Op. 1016A34 RIGHT-HAND CAM COVER - R + R AND REPLACE GASKET.

Proceed with the refitting

Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R.

Proceed with the refitting

Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R.

Proceed with the refitting

Op. 1016A30 LEFT CAM COVER - R + R AND REPLACE GASKET.

Proceed with the refitting

Op. 5510C16 LEFT HAND CYLINDER HEAD IGNITION COIL - R+R.

Proceed with the refitting

Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+R.

Proceed with the refitting

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.

Proceed with the refitting

Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..

Proceed with the refitting

Op. 1092G10 SINGLE ENGINE BELT R R.

Proceed with the refitting

Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.

Proceed with the refitting

Op. 4450B04 RIGHT FRONT WHEEL R R.

Remove the vehicle from the lift.

1.9 JTD 16V

Removing

Proceed with the removal

Op. 1008C10 POWER UNIT UPPER REACTION LINK R R.

Proceed with the removal

Op. 1060G80 DS ELECTRIC INJECTION CONTROL UNIT - R R.

Proceed with the removal

Op. 4450B04 RIGHT FRONT WHEEL R R.

Proceed with the removal

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with the removal

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..

Proceed with the removal

Op. 1092G10 SINGLE ENGINE BELT R R.

Proceed with the removal

Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..

Proceed with the removal

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R.

Proceed with the removal

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.

Proceed with the removal

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.

Proceed with the removal

Op. 1032C30 FIXED TIMING SYSTEM TENSIONER - R + R WITH TIMING BELT REMOVED.

Refitting

Proceed with the refitting

Op. 1032C30 FIXED TIMING SYSTEM TENSIONER - R + R WITH TIMING BELT REMOVED.

Proceed with the refitting

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.

Proceed with the refitting

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.

Proceed with the refitting

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R.

Proceed with the refitting

Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..

Proceed with the refitting

Op. 1092G10 SINGLE ENGINE BELT R R.

Proceed with the refitting

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..

Proceed with the refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with the refitting

Op. 4450B04 RIGHT FRONT WHEEL R R.

Proceed with the refitting

Op. 1060G80 DS ELECTRIC INJECTION CONTROL UNIT - R R.

Proceed with the refitting

Op. 1008C10 POWER UNIT UPPER REACTION LINK R R.

1.8 T.SPARK

Removing

Proceed with the removal

Op. 4450B04 RIGHT FRONT WHEEL R R

Proceed with the removal

Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.

Proceed with the removal

Op. 1092G10 SINGLE ENGINE BELT R R.

Proceed with the removal

Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..

Proceed with the removal

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R.

Proceed with the removal

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.

Proceed with the removal

Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.

Proceed with the removal

5510C14 ROCCHETTI/BOBINE di accensione - S.R.

Proceed with the removal

Op. 1016A20 SINGLE CAM COVER - R + R AND REPLACE GASKET.

Proceed with the removal

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.

Proceed with the removal

Op. 1032C30 FIXED TIMING SYSTEM TENSIONER - R + R WITH TIMING BELT REMOVED.

Refitting

Proceed with the refitting

Op. 1032C30 FIXED TIMING SYSTEM TENSIONER - R + R WITH TIMING BELT REMOVED.

Proceed with the refitting

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.

Proceed with the refitting

Op. 1016A20 SINGLE CAM COVER - R + R AND REPLACE GASKET.

Proceed with the refitting

5510C14 ROCCHETTI/BOBINE di accensione - S.R.

Proceed with the refitting

Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.

Proceed with the refitting

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.

Proceed with the refitting

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R.

Proceed with the refitting

Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..

Proceed with the refitting

Op. 1092G10 SINGLE ENGINE BELT R R.

Proceed with the refitting

Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.

Proceed with the refitting

Op. 4450B04 RIGHT FRONT WHEEL R R

Parts & tools for this job Staging For 2003 Alfa Romeo GT

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.