Right hand cylinder head ignition coil - r+r
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Engine ignition › Right hand cylinder head ignition coil - r+r
RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R
Removing
Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | See A1B BATTERY ( BATTERY NEGATIVE ) |
Proceed with removal
Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R
1. Disconnect the electrical connections from the right cylinder head ignition coils.
2. Undo the bolts (2a) and remove the ignition coils (2b) from the right cylinder head.
| Name | Connector | |
|---|---|---|
| 1 | Ignition coil | See A30 IGNITION ''COIL |
Refitting
Place the ignition coils back in their housings on the right cylinder head and secure them by tightening the bolts to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | IGNITION COIL/REEL | M6 | (Tappet cover side) 0.8 ÷ 1.0 |
Connect the electrical connections to the right cylinder head ignition coils.
Proceed with refitting
Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R.
Connect the negative (-) battery terminal
Parts & tools for this job Staging For 2003 Alfa Romeo GT
- PARTSpark plugsSearch: Alfa Romeo GT 2003 spark plugs
- TOOLSpark plug socketSearch: spark plug socket
- TOOLSpark plug gap toolSearch: spark plug gap tool
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.