Under-engine guard - r r
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Mouldings on protections › Under-engine guard - r r
‹ Prev Right hand rear supplementary wheel arch - r+rNext › Lh or rh reflector(one) on rear bumpers - r r
Body fittingsUnder-engine guard - r r
UNDER-ENGINE GUARD - R R
Removing
Place the vehicle on a lift.
Raise the car.
1. Undo the bolt fixing the protection under the engine.
2. Loosen the front bolts.
Release the mounting bracket for the front direction indicators connector on the right side of the engine protection.
3. Remove the protection under the engine.
Refitting
Check that the protection under the engine is not damaged.
Position the protection and tighten the bolts.
Secure the mounting bracket for the front direction indicators connector on the right side of the engine protection.
Remove the vehicle from the lift.
‹ Prev Right hand rear supplementary wheel arch - r+rNext › Lh or rh reflector(one) on rear bumpers - r r
Parts & tools for this job Staging For 2003 Alfa Romeo GT
- PARTEngine gasket setSearch: Alfa Romeo GT 2003 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.