POWER UNIT UPPER REACTION LINK R R

Operation 1008C10 · POWER UNIT REACTION ELEMENTS

2.0 JTS

Removing

Proceed with removal

Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.

1. Undo the bolts (1a) and remove the power unit upper reaction rod (1b).

Refitting

1. Place the power unit upper reaction rod (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.

Proceed with refitting

Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.

3.2 V6

Removing

1. Undo the bolts (1a) and remove the power unit reaction rod (1b).

Refitting

Place the power unit reaction rod (1a) back in its housing and fix it tightening the bolts to the recommended torque.

1.9 JTD 16V

Removing

1. Remove the engine oil filler cap.

2. Undo the fixing bolts (2a) and remove soundproofing cover (2b).

Tighten the engine oil filler cap.

1. Undo the bolts (1a) and remove the power unit reaction rod (1b).

Refitting

1. Place the power unit reaction rod (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.

Remove the engine oil filler cap.

Place the soundproof cover back in its housing and secure using the relevant bolts.

Tighten the engine oil filler cap.

1.8 T.SPARK

Removing

1. Release the fuel vapour recirculation pipe from the fastening on the power assisted steering fluid reservoir.

2. Undo the bolts (2a) and (2b) and remove the power unit reaction rod (2c).

Refitting

Place the power unit reaction rod back in its housing and secure it by tightening the bolts to the recommended torque.

Fix the fuel vapour recirculation pipe with the band on the power steering fluid reservoir.