TIMING SIDE KNOCK SENSOR - R+R

Operation 5510C48 · COIL, ECU, SENSORS

3.2 V6

Removing

Position the vehicle on the ramp

Proceed with removal

Op. 4450B02 LEFT FRONT WHEEL R R

Proceed with removal

Proceed with removal

Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R R

Proceed with removal

Proceed with removal

Op. 7055B54 UNDER-ENGINE GUARD - R R

Proceed with removal

Proceed with removal

Op. 5530B10 BATTERY - R+R

Proceed with removal

Proceed with removal

Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.

Proceed with removal

1. Undo the bolt (1a) and remove the timing side knock sensor (1b).

Op. 1008C10 POWER UNIT UPPER REACTION LINK R R

Op. 1088D24 RIGID PIPE FOR COOLANT INLET TO WATER PUMP - R + R

Op. 1072B42 LEFT HAND OR RIGHT HAND INLET MANIFOLD (ONE) - R+R

1056B62 l/h and r/h fuel pipe assembly - with injectors - r + r

Op. 1072B12 INTAKE MANIFOLD (ONE) LH OR RH - R R AND REPLACE GASKET

Refitting

Place the timing side detonation sensor back in its housing and fix it tightening the bolt to the recommended torque.

Proceed with refitting

Op. 1072B12 INTAKE MANIFOLD (ONE) LH OR RH - R R AND REPLACE GASKET.

Proceed with refitting

1056B62 l/h and r/h fuel pipe assembly - with injectors - r + r

Proceed with refitting

Op. 1072B42 LEFT HAND OR RIGHT HAND INLET MANIFOLD (ONE) - R+R.

Proceed with refitting

Op. 1088D24 RIGID PIPE FOR COOLANT INLET TO WATER PUMP - R + R.

Proceed with refitting

Op. 1008C10 POWER UNIT UPPER REACTION LINK R R.

Proceed with refitting

Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..

Proceed with refitting

Op. 5530B10 BATTERY - R+R.

Proceed with refitting

Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R R.

Proceed with refitting

Op. 4450B02 LEFT FRONT WHEEL R R.

Refill the engine cooling system with coolant

Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY.

Proceed with refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Remove the car from the ramps.