BATTERY - R+R

Operation 5530B10 · BATTERY AND LEADS

3.2 V6

Removing

1. Loosen the band (1a) and disconnect the oil vapour recirculation pipe (1b) from the corrugated hose.

2. Loosen the bands (2a) and remove the corrugated hose (2b), complete with resonator (2c).

1. Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

2. Open the maxi fuse box cover.

3. Undo the bolts securing the ''maxi-fuse'' box to the battery.

4. Loosen the bolt fixing the battery terminal (+).

5. Release the maxi fuse box from the battery and move it to the side.

1. Undo the nut (1a) for the battery fixing belt (1b).

2. Remove the battery.

Refitting

Place the battery back in its housing.

Secure the battery with its belt and tighten the nut.

Place the maxi fuse box back in its housing on the battery.

Tighten the bolt securing the battery''s (+) terminal.

Tighten the bolts securing the maxifuse box to the battery.

Close the maxi fuse box cover.

Connect the negative (-) battery terminal

Place the corrugated hose, complete with resonator, back in its housing and tighten the bands.

Connect the oil vapour recirculation pipe to the corrugated hose and tighten the band.

1.8 T.SPARK, 2.0 JTS

Removing

Proceed with removal

Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R.

1.8 T.SPARK, 2.0 JTS, 1.9 JTD 16V

Refitting

Place the battery back in its housing.

Secure the battery with its belt and tighten the nut.

Place the box back in its housing on the battery.

Tighten the bolt securing the battery''s (+) terminal.

Tighten the bolts fixing the box to the battery.

Place the cover for the box on the battery back in its housing.

Connect the negative (-) battery terminal

1.8 T.SPARK, 2.0 JTS

Proceed with refitting

Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R..

1.8 T.SPARK, 2.0 JTS, 1.9 JTD 16V

1. Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

2. Remove the cover for the box on the battery.

3. Undo the bolts fixing the box to the battery.

4. Loosen the bolt fixing the battery terminal (+).

5. Release the box from the battery and move it sideways.

1. Undo the nut (1a) for the battery fixing belt (1b).

2. Remove the battery.