FLYWHEEL SIDE KNOCK SENSOR - R+R

Operation 5510C46 · COIL, ECU, SENSORS

3.2 V6

Removing

Position the vehicle on the ramp

Proceed with removal

Op. 4450B02 LEFT FRONT WHEEL R R

Proceed with removal

Proceed with removal

Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R R

Proceed with removal

Proceed with removal

Op. 7055B54 UNDER-ENGINE GUARD - R R

Proceed with removal

Proceed with removal

Op. 5530B10 BATTERY - R+R

1. Undo the bolt (1a) and remove the flywheel side detonation sensor (1b).

Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.

Op. 1008C10 POWER UNIT UPPER REACTION LINK R R

Op. 1088D24 RIGID PIPE FOR COOLANT INLET TO WATER PUMP - R + R

Refitting

Place the flywheel side detonation sensor back in its housing and fix it tightening the bolt to the recommended torque.

Proceed with refitting

Op. 1088D24 RIGID PIPE FOR COOLANT INLET TO WATER PUMP - R + R.

Proceed with refitting

Op. 1008C10 POWER UNIT UPPER REACTION LINK R R.

Proceed with refitting

Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..

Proceed with refitting

Op. 5530B10 BATTERY - R+R.

Proceed with refitting

Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R R.

Proceed with refitting

Op. 4450B02 LEFT FRONT WHEEL R R.

Refill the engine cooling system with coolant

Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY.

Proceed with refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Remove the car from the ramps.