Workshop Manuals Factory service & repair Land Rover
01 02 WORKSHOP MANUAL SUPPLEMENT03 04 CONTENTS05 06 CONTENTS07 INFORMATION08 09 INTRODUCTION10 GENERAL SPECIFICATION DATA11 ENGINE TUNING DATA12 GENERAL FITTING REMINDERS13 MAINTENANCE14 ENGINE15 EMISSION CONTROL16 ENGINE MANAGEMENT SYSTEM17 FUEL SYSTEM18 COOLING SYSTEM19 MANIFOLD AND EXHAUST SYSTEM20 CLUTCH21 MANUAL GEARBOX22 TRANSFER GEARBOX23 PROPELLER SHAFTS24 STEERING25 FRONT SUSPENSION26 REAR SUSPENSION27 BRAKES28 CHASSIS AND BODY29 PANEL REPAIRS30 AIR CONDITIONING31 WIPERS AND WASHERS32 ELECTRICAL33 INSTRUMENTS
Land Rover TD5 Defender31 · WIPERS AND WASHERS
31 · Electrical

WHEELBOX/DRIVE PIVOT - FROM 02MY

Make
Land Rover
Model
Defender TD5 Defender
Section
WHEELBOX/DRIVE PIVOT - FROM 02MY
WIPERS AND WASHERSWHEELBOX/DRIVE PIVOT - FROM 02MY
background image

84

WIPERS AND WASHERS

4

REPAIR

15. Fit nut plate and fit screws to secure nut plate

and closing panel.

16. Fit knobs to air vent control levers.
17. Fit fascia console. See CHASSIS AND BODY,

Repair.

18. Fit wiper arms. See this Section.
19. Connect battery negative lead. See

ELECTRICAL, Repair.

WHEELBOX/DRIVE PIVOT - FROM 02MY

Service repair no - 84.15.25

Remove

1. Disconnect battery negative lead. See

ELECTRICAL, Repair.

2. Remove steering column nacelle. See

STEERING, Repair.

3. Remove wiper motor and drive rack. See this

Section.

4. Remove 2 screws and move heater fan switch

aside.

5. Remove 2 screws securing drivers side demister

duct.

6. Disconnect demister tube and remove duct.
7. Remove bolt and nut and bolt securing steering

column support bracket and remove bracket.

8. Remove 11 screws securing fascia support rail.

Parts & tools for this job Staging For Land Rover Defender

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.