Workshop Manuals Factory service & repair Land Rover
01 02 WORKSHOP MANUAL SUPPLEMENT03 04 CONTENTS05 06 CONTENTS07 INFORMATION08 09 INTRODUCTION10 GENERAL SPECIFICATION DATA11 ENGINE TUNING DATA12 GENERAL FITTING REMINDERS13 MAINTENANCE14 ENGINE15 EMISSION CONTROL16 ENGINE MANAGEMENT SYSTEM17 FUEL SYSTEM18 COOLING SYSTEM19 MANIFOLD AND EXHAUST SYSTEM20 CLUTCH21 MANUAL GEARBOX22 TRANSFER GEARBOX23 PROPELLER SHAFTS24 STEERING25 FRONT SUSPENSION26 REAR SUSPENSION27 BRAKES28 CHASSIS AND BODY29 PANEL REPAIRS30 AIR CONDITIONING31 WIPERS AND WASHERS32 ELECTRICAL33 INSTRUMENTS
Land Rover TD5 Defender28 · CHASSIS AND BODY
28 · Body & interior

GLASS - REAR DOOR - FROM 02MY

Make
Land Rover
Model
Defender TD5 Defender
Section
GLASS - REAR DOOR - FROM 02MY
CHASSIS AND BODYGLASS - REAR DOOR - FROM 02MY
background image

CHASSIS AND BODY

29

REPAIR

25. Position console and connect Lucar and

multiplug to cigar lighter.

26. Connect multiplugs to remaining switches.
27. Fit console and secure with screws.
28. Fit crash pad and secure with screws.
29. Fit demister vents and secure with screws.
30. Fit grab handle, secure with screws and fit Land

Rover decal.

31. Fit heater control to fascia and secure with

screws.

32. Position instrument pack and connect multiplugs.
33. Fit instrument pack to fascia and secure with

screws.

34. Fit radio. See ELECTRICAL, Repair.
35. Connect battery earth lead. See ELECTRICAL,

Repair.

GLASS - REAR DOOR - FROM 02MY

Service repair no - 76.31.02

Remove

1. Remove rear door mounting panel. See this

Section.

2. Loosen 2 nuts and remove door check strap

torsion bar and plate.

3. Remove check strap.

4. Remove inner and outer waist seal.

5. Remove screw from each glass channel.
6. Lower glass to bottom of door, lift over lower

edge and withdraw from door.

Parts & tools for this job Staging For Land Rover Defender

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.