RADIATOR COOLING FAN - R + R

Operation 1088E10 · COOLANT TEMPERATURE CONTROL DEVICES

2.0 JTS

Removing

Position the vehicle on a lift.

Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

1. Disconnect the electrical connections from the engine cooling fan resistor.

2. Disconnect the electrical connection from the engine cooling fan motor and release the wiring from the collar.

1. Undo the upper retaining bolts for the radiator cooling fan.

Proceed with the removal

Op. 7055B54 UNDER-ENGINE GUARD - R R.

1. Undo the lower bolts (1a) and remove the radiator fan (1b).

Refitting

Refit the radiator cooling fan and secure with lower bolts.

Proceed with the refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Undo the upper retaining bolts for the radiator cooling fan.

Connect the electrical connection to the radiator cooling fan motor and secure the wiring to the collar.

Connect the electrical connections to the engine cooling fan resistor.

Connect the negative battery terminal (-).

Remove the vehicle from the lift.

1.9 JTD 16V

Removing

Position the vehicle on a lift.

Proceed with removal - 1016A10 SOUNDPROOFING COVER - R&R

Proceed with the removal

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with the removal

Op. 5530B10 BATTERY - R+R.

Proceed with the removal

Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..

Proceed with the removal

Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE.

1. Undo the bolts (1a) and remove the radiator cooling fan (1b).

Refitting

Refit the radiator cooling fan in its seat and secure with bolts.

Proceed with the refitting

Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE.

Proceed with the refitting

Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..

Proceed with the refitting

Op. 5530B10 BATTERY - R+R.

Proceed with the refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Refill the engine cooling system

Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY.

Proceed with refitting - 1016A10 SOUNDPROOFING COVER - R&R

Remove the vehicle from the lift.

1.8 T.SPARK

Removing

• Position the vehicle on a lift.
• Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

1. Disconnect the electrical connections from the engine cooling fan resistor.

2. Disconnect the electrical connection from the engine cooling fan motor and release the wiring from the collar.

• Undo the upper retaining bolts for the radiator cooling fan.

• Undo the lower bolts (1a) and remove the radiator cooling fan (1b).

Refitting

• Refit the radiator cooling fan and secure with lower bolts.
• Undo the upper retaining bolts for the radiator cooling fan.
• Connect the electrical connection to the radiator cooling fan motor and secure the wiring to the collar.
• Connect the electrical connections to the engine cooling fan resistor.
• Connect the negative battery terminal (-).
• Remove the vehicle from the lift.