Coolant pipe between coolant reservoir and thermostat - r.r.
- Make
- Alfa Romeo
- Model
- 159 Factory Service Manual
- Year
- 2005–2011
- Section
- Engine cooling › Coolant pipe between coolant reservoir and thermostat - r.r.
COOLANT PIPE BETWEEN COOLANT RESERVOIR AND THERMOSTAT - R.R.
Removing
Op. 0010T20 ENGINE COOLANT - CHANGE
1. Loosen the band and disconnect the engine cooling system supply pipe (1a) from the three-way connector between the radiator and the thermostat (1b).
1. Loosen the band and disconnect the engine cooling system supply pipe from the reservoir.
- Remove the engine cooling system supply pipe.
Refitting
- Place the engine cooling system supply pipe in position.
- Connect the engine cooling system supply pipe to the reservoir and secure it using the band.
- Connect the engine cooling system supply pipe to the three-way connector between the radiator and the thermostat and secure it using the band.
Parts & tools for this job Staging For 2005 Alfa Romeo 159
- FLUIDCoolantSearch: Alfa Romeo coolant antifreeze
- PARTThermostatSearch: Alfa Romeo 159 2005 thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.