RIGHT TAPPET COVER - R + R AND REPLACE GASKET

Operation 1016A34 · TAPPET COVERS

3.2 JTS

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 1072B50 AIR CHAMBER - R.R.

Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R

1. Move the wiring mounting bracket forwards, in the direction of travel, to release it from the retaining clips on the tappet cover and then move it to one side.

- Release the engine wiring from the intermediate retaining clips.

2. Undo the bolts and remove the tappet cover for the right head.

Refitting

- Place the tappet cover for the right head in position and secure it by tightening the bolts to the recommended torque.

- Secure the engine wiring using the intermediate retaining clips.

- Place the wiring mounting bracket in position and secure it to the tappet cover using the retaining clips.

Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R

Op. 1072B50 AIR CHAMBER - R.R.

Op. 1016A10 SOUND-PROOFING COVER - R.R