Workshop Manuals Factory service & repair Land Rover
01 02 WORKSHOP MANUAL SUPPLEMENT03 04 CONTENTS05 06 CONTENTS07 INFORMATION08 09 INTRODUCTION10 GENERAL SPECIFICATION DATA11 ENGINE TUNING DATA12 GENERAL FITTING REMINDERS13 MAINTENANCE14 ENGINE15 EMISSION CONTROL16 ENGINE MANAGEMENT SYSTEM17 FUEL SYSTEM18 COOLING SYSTEM19 MANIFOLD AND EXHAUST SYSTEM20 CLUTCH21 MANUAL GEARBOX22 TRANSFER GEARBOX23 PROPELLER SHAFTS24 STEERING25 FRONT SUSPENSION26 REAR SUSPENSION27 BRAKES28 CHASSIS AND BODY29 PANEL REPAIRS30 AIR CONDITIONING31 WIPERS AND WASHERS32 ELECTRICAL33 INSTRUMENTS
Land Rover TD5 Defender32 · ELECTRICAL
32 · Electrical

RELAY - REAR FOG GUARD - FROM 02MY

Make
Land Rover
Model
Defender TD5 Defender
Section
RELAY - REAR FOG GUARD - FROM 02MY
ELECTRICALRELAY - REAR FOG GUARD - FROM 02MY
background image

86

ELECTRICAL

18

REPAIR

RELAY - REAR FOG GUARD - FROM 02MY

Service repair no - 86.55.53

Remove

1. Disconnect battery negative lead. See this

Section.

2. Remove 4 screws securing instrument pack and

release pack from fascia.

3. Disconnect 2 multiplugs from warning lamp

panel.

4. Disconnect instrument pack multiplug from main

harness.

5. Remove instrument pack.

6. Remove screw securing relay bracket,

disconnect multiplug and remove relay.

Refit

7. Fit relay, connect multiplug and secure relay with

screw.

8. Position instrument pack and connect multiplugs.
9. Fit instrument pack to fascia and secure with

screws.

10. Connect battery negative lead. See this

Section.

Parts & tools for this job Staging For Land Rover Defender

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.