HARNESS - FRONT DOOR - FROM 02MY
- Make
- Land Rover
- Model
- Defender TD5 Defender
- Section
- HARNESS - FRONT DOOR - FROM 02MY
86
ELECTRICAL
10
REPAIR
SWITCH - FASCIA - FROM 02MY
Service repair no - 86.25.18
Remove
1. Remove radio. See this Section.
2. Release switch, disconnect multiplug and
remove switch.
Refit
3. Connect multiplug to switch and fit switch to
panel.
4. Fit radio. See this Section.
HARNESS - FRONT DOOR - FROM 02MY
Service repair no - 86.25.20
Remove
1. Remove door lock solenoid. See this Section.
2. Carefully peel back section of plastic sheet for
access to harness.
3. Release clips securing harness to panel.
4. Disconnect multiplug from motor.
5. Release harness sleeve and withdraw harness
from door.
6. Release harness sleeve and withdraw harness
multiplugs from ’A’ post.
7. Disconnect 2 multiplugs and remove harness.
Parts & tools for this job Staging For Land Rover Defender
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.