PANEL - MOUNTING - FRONT DOOR - FROM 02MY
- Make
- Land Rover
- Model
- Defender TD5 Defender
- Section
- PANEL - MOUNTING - FRONT DOOR - FROM 02MY
CHASSIS AND BODY
23
REPAIR
59. Fit radio housing to fascia and secure with trim
studs.
60. Position radio to fascia and connect multiplugs
and aerial.
61. Fit radio to fascia.
62. Fit crash pad to fascia and secure with screws.
63. Fit both demister vents to crash pad and secure
with screws.
64. Fit grab handle to fascia and secure with screws.
65. Fit Land Rover decal to grab handle.
66. Position both front speakers to fascia and
connect multiplugs.
67. Fit speakers to fascia and secure with screws.
68. Fit locking rings to speakers.
69. Connect multiplugs and Lucars to HRW, Rear
Fog Guard Lamp, and Hazard Warning
Switches.
70. Fit switches to fascia.
71. Position heater controls to fascia and secure
with screws.
72. Fit instrument pack. See ELECTRICAL,
Repair.
73. Fit 2 halves of nacelle to steering column and
secure with screws.
74. Fit steering wheel. See STEERING, Repair.
75. Reconnect battery negative lead.
PANEL - MOUNTING - FRONT DOOR - FROM 02MY
Service repair no - 76.11.28
Remove
1. Remove plastic sheet. See this Section.
2. Lower glass and remove 2 bolts securing door
glass to regulator.
3. Release glass from regulator, raise and wedge
in raised position.
Parts & tools for this job Staging For Land Rover Defender
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Land Rover touch up paint
- PARTPanel clip assortmentSearch: Land Rover panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.