Clutch pedal - r+r

Operation 3330B26 · Pedal unit

Removing

Proceed with removal - 7040A30 Left instrument panel lower TRIM - R.R..

Undo both bolts and remove the underfacia beam lower reinforcement.

1.2 8v, 1.2 16v, 1.4 16v

Proceed with removal - 1056B78 SWITCH on CLUTCH PEDAL - R.R..

1.3 JTD

Proceed with the removal - 1060G42 clutch pedal switch - r r

1. Release the retaining clips (1a) and disengage the clutch master cylinder push rod (1b) from the pedal.

1. Remove the stop clip (1a), withdraw the pin (1b) and remove the clutch pedal (1c) with spring device.

All versions

Refitting

Refit in its seating the clutch pedal with spring device, then secure it with the pin and retaining clip.

Connect the clutch pedal by replacing in its seat and press the pedal fully down.

1.3 JTD

Proceed with refitting - 1060G42 clutch pedal switch - r r.

1.2 8v, 1.2 16v, 1.4 16v

Proceed with refitting - 1056B78 SWITCH on CLUTCH PEDAL - R.R..

Refit the underfacia beam lower reinforcement and tighten the bolts

Proceed with refitting - 7040A30 Left instrument panel lower TRIM - R.R..