Workshop Manuals Factory service & repair Lancia
Lancia Ypsilon Factory Service Manual (2003-2011)12 · Brakes
12 · Brakes

Front disc brakes - r.r.

Make
Lancia
Model
Ypsilon Factory Service Manual
Year
2003–2011
Section
Disc brakes › Front disc brakes - r.r.
BrakesFront disc brakes - r.r.

FRONT DISC BRAKES - R.R.

Operation 3310A14 · FRONT DISC BRAKES

Removing

Position the vehicle on the ramp.

Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

NameConnector
BatteryA1B

Proceed with removal - 4450B12 front or rear wheels (two) - r+r.

Proceed with removal - 3310A32 FRONT BRAKE CALIPERS - R.R..

1. Undo the bolts (1a) and remove the front brake caliper brackets (1b).

FRONT DISC BRAKES - R.R.

1. Unscrew the bolts (1a) and remove the front brake discs (1b).

FRONT DISC BRAKES - R.R.

Refitting

1. Refit the front brake discs (1a) in their seatings and tighten the bolts (1b) to the recommended torque.

FasteningComponentØ

Value

(daNm)

1bPinFRONT BRAKE DISC.M8(Wheel hub side) 1.0 ÷ 1.4
FRONT DISC BRAKES - R.R.

1. Place the front brake caliper brackets (1a) back in their housings and fix them tightening the bolts (1b) to the recommended torque.

FasteningComponentØ

Value

(daNm)

1bBoltFRONT BRAKE CALIPER BRACKETM12(Stub axle side) 10.0 ÷ 11.0
FRONT DISC BRAKES - R.R.

Proceed with refitting - 3310A32 FRONT BRAKE CALIPERS - R.R..

Proceed with refitting - 0010T64 brake and or clutch fluid check level and top up as necessary.

Proceed with refitting - 0010T65 hydraulic brake system bleed air.

Proceed with refitting - 4450B12 front or rear wheels (two) - r+r.

Connect the negative (-) battery terminal.

Remove the car from the ramps.

Parts & tools for this job Staging For 2003 Lancia Ypsilon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.