Pistons and connecting rods – pistons and connecting rods
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Engine › Pistons and connecting rods – pistons and connecting rods
‹ Prev Crankcase sump and covers – oil seals on crankshaftNext › Timing system – BELT-DRIVEN TIMING SYSTEM
Tightening torquesPistons and connecting rods – pistons and connecting rods
PISTONS AND CONNECTING RODS – PISTONS AND CONNECTING RODS
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 2.4 - 2.6 + 60° | Bolt | CONNECTING ROD CAP | M9 | 2.0 TB |
| 0.8 -1.0 (Engine crankcase side) | Side bolts | OIL SUMP | M6 | 2.0 TB |
| 2.3 - 2.7 (Engine crankcase side) | Front and rear bolts | OIL SUMP | M8 | 2.0 TB |
| 2.0 + 60° | Bolt | CONNECTING ROD CAP | M9 | 2.4 20 V,2.0 TB |
| (Engine crankcase side) 0.9 -1.2 | Side bolts | OIL SUMP | M6 | 2.4 20 V,2.0 TB |
| (Engine crankcase side) 2.3 - 3.3 | Front and rear bolts | OIL SUMP | M8 | 2.4 20 V,2.0 TB |
| 2.0 + 50° | Nut | CONNECTING ROD CAPS | M9 | T.T |
| 1.4 - 2.0 | Bolt | CRANKCASE SUMP | M7 | T.T |
| 2.4 ÷ 2.6 + 228° ÷ 232° | Nut | CYLINDER LINER/BORE LOCK TOOLS | M12 | 3.2 V6 |
| (Crankcase sump side) 2.3 - 2.8 | Bolt | SINGLE BELT FIXED TENSIONER VARIOUS | M8 | 3.2 V6 |
| (Engine crankcase side) 1.4 - 1.7 | Bolt | OIL SUMP | M7 | 3.2 V6 |
| (Engine oil pump side) 4.5 - 5.5 | Bolt | ENGINE OIL PUMP DRIVE CHAIN | M10 | 3.2 V6 |
| (Crankshaft side) 22.8 - 25.2 | Left nut | CRANKSHAFT PULLEY | M28 | 3.2 V6 |
| (Crankshaft side) 2.9 -3.2 + 48° - 51° | Bolt | FLYWHEEL (MECH.) | M12 | 3.2 V6 |
| (Main bearing caps side) 4.5 - 5.5 | Bolt | ENGINE OIL PUMP | M10 | 3.2 V6 |
| 1.9 ÷ 2.1 + 48° ÷ 52° | Bolt | CONNECTING ROD CAPS | M9 | 3.2 V6 |
| 1.9 ÷ 2.1 + 48° ÷ 52° | Bolt | CONNECTING ROD CAPS | M9 | 3.2 V6 |
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 2.0 + 60° | Bolt | CONNECTING ROD CAPS | M9 | 2.4 JTD 10V |
| 0.9 - 1.2 | Side bolts | OIL SUMP | M6 | 2.4 JTD 10V |
| 2.3 ÷ 3.3 | Front and rear bolts | OIL SUMP | M8 | 2.4 JTD 10V |
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 2.0 + 60° | Bolt | CONNECTING ROD CAPS | M9 | T.T |
| 2.0 + 60° | Bolt | CONNECTING ROD CAPS | M9 | 2.4 JTD 20V |
| (Engine crankcase side) 0.9 - 1.2 | Side bolts | OIL SUMP | M6 | 2.4 JTD 20V |
| (engine crankcase side) 2.3 - 3.3 | Front and rear bolts | CRANKCASE SUMP | M8 | 2.4 JTD 20V |
‹ Prev Crankcase sump and covers – oil seals on crankshaftNext › Timing system – BELT-DRIVEN TIMING SYSTEM
Parts & tools for this job Staging For 2002 Lancia Thesis
- PARTEngine gasket setSearch: Lancia Thesis 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.