POWER UNIT SUPPORTS – power unit fastenings

Make: Lancia
Model: Thesis Factory Service Manual
Year: 2002–2009
Section: Engine › POWER UNIT SUPPORTS – power unit fastenings

‹ Prev Hubs and wheels – rear wheel hubs Next › POWER UNIT SUPPORTS – power unit mounting blocks

Tightening torquesPOWER UNIT SUPPORTS – power unit fastenings

POWER UNIT SUPPORTS – power unit fastenings

2.0 TB, 2.4 20V, 3.0 V6, 3.2 V6

Value - daNm	Fastening	Component	Ø	Validity
(on flexible mounting) 5	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10 X 1.25	2.4 20 V,2.0 TB
(on gearbox) 5	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10 X 1.25	2.4 20 V,2.0 TB
(to the cylinder block/crankcase) 5	Bolt	RIGID REAR SUPPORT POWER UNIT	M12 X 1.25	2.4 20 V
(on the crankcase sump) 2.5	Nut	RIGID REAR SUPPORT POWER UNIT	M8	2.4 20 V
(to the flexible mounting) 5	Nut	RIGID REAR SUPPORT POWER UNIT	M10 X 1.25	2.4 20 V
5	Nut	ALTERNATOR ASSEMBLY	M10 X 1.25	2.4 20 V
7	Nut	ALTERNATOR ASSEMBLY	M12 X 1.25	2.4 20 V
(to the cylinder block/crankcase) 2	Bolt	RIGID REAR SUPPORT POWER UNIT	M8	T.T
(to the cylinder block/crankcase) 2	Nut	RIGID REAR SUPPORT POWER UNIT	M8	T.T
(to the flexible mounting) 4	Nut	RIGID REAR SUPPORT POWER UNIT	M10	T.T
4,5	Nut	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M10X1.25	T.T
(to the cylinder block/crankcase) 5	Bolt	RIGID REAR SUPPORT POWER UNIT	M12 X 1.25	2.0 TB
(on the crankcase sump) 2.5	Nut	RIGID REAR SUPPORT POWER UNIT	M8	2.0 TB
(to the flexible mounting) 5	Nut	RIGID REAR SUPPORT POWER UNIT	M10 X 1.25	2.0 TB
5	Nut	ALTERNATOR ASSEMBLY	M10 X 1.25	2.0 TB
7	Nut	ALTERNATOR ASSEMBLY	M12 X 1.25	2.0 TB
(to the cylinder block/crankcase) 5	Bolt	RIGID ENGINE MOUNT, TIMING SIDE	M10 X 1.25	2.4 20 V,2.0 TB
5	Nut	RIGID ENGINE MOUNT, TIMING SIDE	M10 X 1.25	2.4 20 V,2.0 TB
5	Nut	RIGID REAR SUPPORT POWER UNIT	M10 X 1.25	2.4 20 V,2.0 TB
4,5	Nut	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M10X1.25	T.T
2.2	Bolt	POWER STEERING PUMP SUPPORT/BRACKET	M8	T.T
2.2	Nut	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M8	T.T
5	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10	T.T
5	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10	T.T
5	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M12 X 1.25	T.T
5	Nut	POWER UNIT GEAR BOX END RIGID MOUNT	M10 X 1.25	T.T
0.5	Nut	TERMINAL/MOTOR LEAD	M8	T.T
5	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10	2.4 20 V
5	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10	2.4 20 V
5	Nut	POWER UNIT GEAR BOX END RIGID MOUNT	M10 X 1.25	2.4 20 V
5	Nut	POWER UNIT GEAR BOX END RIGID MOUNT	M10 X 1.25	2.4 20 V
0.5	Nut	TERMINAL/MOTOR LEAD	M8	2.4 20 V

2.4 JTD 10V

Value - daNm	Fastening	Component	Ø	Validity
(mounting side) 5	Threaded pin	POWER UNIT GEAR BOX END RIGID MOUNT	M10	2.4 JTD 10V
(Gearbox side) 5	Bolts	POWER UNIT GEAR BOX END RIGID MOUNT	M10	2.4 JTD 10V
5	Bolt	RIGID REAR SUPPORT POWER UNIT	M10 X 1.25	2.4 JTD 10V
2.5	Bolt	RIGID REAR SUPPORT POWER UNIT	M8	2.4 JTD 10V
5	Nut	RIGID REAR SUPPORT POWER UNIT	M10 X 1.25	2.4 JTD 10V
5	Bolt	FRONT ALTERNATOR SUPPORT	M10	2.4 JTD 10V
5	Nut	ALTERNATOR ASSEMBLY	M10 X 1.25	2.4 JTD 10V
7	Nut	ALTERNATOR ASSEMBLY	M12 X 1.25	2.4 JTD 10V
(cylinder block/crankcase side) 7	Nuts	RIGID ENGINE MOUNT, TIMING SIDE	M10X1.25	2.4 JTD 10V
5	Nut	RIGID TIMING SUPPORT POWER UNIT	M10X1.25	2.4 JTD 10V
5	Nut	RIGID REAR SUPPORT POWER UNIT	M10 X 1.25	2.4 JTD 10V
5	Bolt	SINGLE BELT FIXED TENSIONER VARIOUS	M12X1.25	2.4 JTD 10V

2.4 JTD 20V

Value - daNm	Fastening	Component	Ø	Validity
(Mounting side) 5.8	Threaded pin	POWER UNIT GEAR BOX END RIGID MOUNT	M10X1.25	T.T
(Gearbox side) 5	Bolts	POWER UNIT GEAR BOX END RIGID MOUNT	M10	T.T
(Mount) 5.8	Nuts	GEARBOX SIDE RUBBER MOUNT	M10X1.25	T.T
1.5	Nuts	HYDRAULIC AND ELECTRONIC CONTROL UNIT	M8	T.T
(body) 5	Bolt	POWER UNIT REACTION ROD	M10	T.T
5	Bolt	RIGID REAR SUPPORT POWER UNIT	M10 X 1.25	T.T
2.5	Bolt	RIGID REAR SUPPORT POWER UNIT	M8	T.T
4,5	Nut	POWER UNIT REAR RIGID MOUNT	M10 X 1.25	T.T
5	Bolt	FRONT ALTERNATOR SUPPORT	M10	T.T
5	Nut	ALTERNATOR ASSEMBLY	M10 X 1.25	T.T
7	Nut	ALTERNATOR ASSEMBLY	M12 X 1.25	T.T
(cylinder block/crankcase side) 7	Nuts	RIGID ENGINE MOUNT, TIMING SIDE	M10X1.25	T.T
5.8	Bolt	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M10 X 1.25	T.T
4,5	Nut	POWER UNIT RIGID TIMING MOUNT	M10 X 1.25	T.T
4,5	Nut	POWER UNIT REAR RIGID MOUNT	M10 X 1.25	T.T
(cylinder block/crankcase side) 7	Nuts	RIGID ENGINE MOUNT, TIMING SIDE	M10X1.25	T.T

‹ Prev Hubs and wheels – rear wheel hubs Next › POWER UNIT SUPPORTS – power unit mounting blocks

Parts & tools for this job Staging For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.