POWER STEERING BOX - R.R.

Operation 4130A10 · POWER STEERING BOX

Removing

- Position the vehicle on the lift with the wheels perfectly straight.

- Mark the position of the steering wheel in relation to the upper half-casing.

- Proceed with removing the front suspension frame without dismantling the chassis components at the bench; carry out the appropriate operation

1. At the bench, undo the bolts (1a), disconnect the connector (1b) for the return pipe, then remove the power assisted steering box (1c).

Refitting

- Position the power assisted steering box and fasten it to the frame tightening the bolts to the recommended torque.

- Connect the connector for the reservoir return pipe to the steering box.

See in Op. 4410D10 Front suspension FRAME - R.R.

- Proceed with removing the front suspension frame without dismantling the chassis components at the bench;

- Remove the vehicle from the lift.