Power assisted steering electric circuit electronic control unit - R.R.
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Power assisted steering › Power assisted steering electric circuit electronic control unit - R.R.
‹ Prev DUPLEX PIPES from cooling coil or heat exchanger radiator - R.R.Next › Converter VALVE ON power steering box - R.R.
SteeringPower assisted steering electric circuit electronic control unit - R.R.
Power assisted steering electric circuit electronic control unit - R.R.
Removing
- Disconnect the negative battery terminal.
1. Release and remove the front carpet, passenger side.
1. Release the electronic control unit access cover, passenger side.
1. Undo the fixing nuts (1a) and disconnect the electrical connector (1b).
| Description | Connector | |
|---|---|---|
| 1b | Servotronik control unit | M088 |
Refitting
- Connect the electrical connector for the suspension control unit and place it in position.
| Description | Connector | |
|---|---|---|
| Servotronik control unit | M088 |
- Tighten the nuts fixing the servotronik control unit.
- Reposition the electronic control unit access cover, passenger side.
- Reposition the front carpet, driver's side.
- Connect the negative battery terminal.
‹ Prev DUPLEX PIPES from cooling coil or heat exchanger radiator - R.R.Next › Converter VALVE ON power steering box - R.R.
Parts & tools for this job Staging For 2002 Lancia Thesis
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Lancia power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.