Engine oil level sensor - r.r.
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Engine lubrication › Engine oil level sensor - r.r.
ENGINE OIL LEVEL SENSOR - R.R.
Removing
- Position the vehicle on a lift.
- Disconnect the negative battery terminal.
- Raise the lift.
See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.
1. Disconnect the electrical connection for the switch.
| Description | Connector | |
|---|---|---|
| 1 | Engine oil level sensor | K032 |
2. Undo and remove the engine oil pressure warning light switch.
Refitting
- Fit the engine oil pressure warning light switch.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 3 | OIL LEVEL DIPSTICK SENSOR | M12 X 1.25 |
- Connect the electrical connection.
| Description | Connector | |
|---|---|---|
| Engine oil level sensor | K032 |
See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.
- Lower the lift.
- Connect the negative battery terminal.
- Remove the vehicle from the lift.
Removing
See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.
1. Disconnect the electrical connection (1a), then undo and remove the engine oil level sensor (1b).
| Description | Connector | |
|---|---|---|
| 1a | Engine oil level sensor | K032 |
Refitting
- Position the engine oil level sensor and tighten it to the recommended torque.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 3 | OIL LEVEL DIPSTICK SENSOR | M12 X 1.25 |
- Connect the electrical connection.
| Description | Connector | |
|---|---|---|
| Engine oil level sensor | K032 |
See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.
Removing
- Position the vehicle on a lift.
See in Op. 5530B10 BATTERY - R.R.
- Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal.
1. Disconnect the electrical connection from the engine oil level sensor.
| Description | Connector | |
|---|---|---|
| 1 | Engine oil level sensor | K032 |
- [7040D12]
1. Undo and remove the engine oil level sensor.
Refitting
- Fit the engine oil level sensor and tighten it to the recommended torque.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 2.4 | OIL LEVEL DIPSTICK SENSOR |
- [7040D12]
- Cnnect the electrical connection to the engine oil level sensor.
| Description | Connector | |
|---|---|---|
| Engine oil level sensor | K032 |
- Connect the negative battery terminal.
- Remove the vehicle from the lift.
Removing
- Position the vehicle on a lift.
- Disconnect the negative battery terminal.
- Raise the lift.
See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.
1. Disconnect the electrical connection for the switch.
| Description | Connector | |
|---|---|---|
| 1 | Engine oil level sensor | K032 |
2. Undo and remove the engine oil pressure warning light switch.
Refitting
- Fit the engine oil pressure warning light switch.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 3 | OIL LEVEL DIPSTICK SENSOR | M12 X 1.25 |
- Connect the electrical connection.
| Description | Connector | |
|---|---|---|
| Engine oil level sensor | K032 |
See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.
- Lower the lift.
- Connect the negative battery terminal.
- Remove the vehicle from the lift.
Parts & tools for this job Staging For 2002 Lancia Thesis
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.