Engine oil FILLER - R.R.

Operation 1084A22 · INDICATORS/CHECK DEVICES

2.4 JTD 20V

Removing

- Disconnect the negative battery terminal.

See in Op. 1016A10 SOUND-PROOFING COVER - R.R.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.

- Disconnect the electrical connection from the engine coolant temperature sensor.

1. Loosen the band and disconnect the engine oil vapour recovery pipe from the engine oil filler.

2. Undo the bolts (2a) and remove the engine oil filler (2b).

3. Remove the gasket.

Refitting

- Fit the engine oil filler complete with gasket and fasten it tightening the fixing bolts to the recommended torque.

- Connect the engine oil vapour recovery pipe to the engine oil filler and tighten the band.

- Connect the electrical connection to the engine coolant temperature sensor.

See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

See in Op. 1016A10 SOUND-PROOFING COVER - R.R.

- Connect the negative battery terminal.